MATERIALS OF CONSTRUCTION: • Filter media: 100% nylon (polyamide) • Support core: nylon FEATURES AND BENEFITS: • Absolute rated medium from 1 micron to 120 micron. • Microfine, thermally bonded fiber construction for consistent q performance. • Superior efficiency at exceptionally low pressure drop. • All nylon support core. • High dirt holding capacity results in longer life and lower filtration c.cost. • No media migration from thermally bonded fiber structure. • Contains no resin binders, solvents, wetting or anti-static agents. • Excellent chemical resistance and compatibility with aliphatic and b.aromatic solvents. • Continuous one piece construction from 5”(125mm) to 60”(1525mm) SPECIFICATION: Absolute Filtration Ratings: 1µm, 3µm, 5µm, 10µm, 20µm, 30µm, 40µm, 50µm, 70µm, 90µm, 120µm Dimensions: 1” ID x 2-9/16” OD 5”, 10”, 20”, 40” and 60” continuous nominal length. Recommended Operating Conditions: • Maximum Differential pressure: 60 psid ( 4.1 bar) @ 80º F ( 27ºC ) • Maximum Temperature: 300ºF ( 150ºC ) • Recommended Filter Change Out: Delta P: 30 psi (2.1 bar)

ULTRASPUN N SERIES CARTRIDGE FILTERS PARTICLE REMOVAL RATINGS Filter Grade Absolute 99.9% efficiency 99% efficiency 90% efficiency Micron Beta=5000 Beta=1000 Beta=100 Beta=10 1 1.0 0.9 < 0.5 < 0.5 3 3.0 2.5 1.8 1.0 5 5.0 3.7 2.0 1.8 10 10.0 9.0 7.5 6.5 20 20.0 18.0 13.0 10.0 30 30.0 25.0 18.0 15.0 40 40.0 35.0 30.0 20.0 50 50.0 45.0 32.0 25.0 70 * 60.0 50.0 35.0 90 * 80.0 75.0 50.0 120 * 100.0 85.0 75.0 * It is not possible to evaluate 100% removal efficiency with the standard test procedure for coarse grades. Flow Rate is per 10” Cartridge ( micron rating : 0.5µm, 1µm, 3µm, 5µm, 10µm.) Flow Rate is per 10” Cartridge ( micron rating : 20µm, 50-70µm, 90-120µm,)